Name: Anway LED driver ECO-350E15 15W 350mA 22-43V
Brand: Anway
SKU: 00012177
Price: 13.40 EUR
Availability: InStock

Anway LED driver ECO-350E15 15W 350mA 22-43V

High reliability & efficiency
Short circuit & overload protection
for indoor use IP20
Not dimmable

Description

Technical Data:

Input:	220-240 V / AC 50-60 Hz
Output voltage:	22-43 Volt / DC
Output power:	15 Watt
Output current:	350 mA
Design:	Driver [Constant Current CC]
Dimmable:	No
Type of connection:	Screw clamps
Casing:	Thermoplastic
Dimensions:	L: 122 mm (4.8”) W: 39 mm (1.5”) H: 18 mm (0.7”)
Field of application:	Suitable for dry rooms only

See also product data sheet.

Additional information

Model	CC [Constant Current]
Output Power	above 10 Watt
Output Current	350 mA
Brand	Anway

About brand

The right ballasts/drivers for every LED project!

Nothing works with LEDs without a ballast. But not all LED drivers are the same. The LED drivers of the Anway brand are characterised by a wide variety and their particularly small design, which also predestines them for false ceiling mounting. However, the core of the Anway brand is the highest efficiency and maximum reliability of the drivers. And of course, all ballasts are tested according to CE, GS, EMC or ENECand have protection class IP20.

Delivery & Safety Instructions

Scope of delivery

1 x Ballast

Safety Instructions

Each unit has left the factory in a safe condition. To maintain this condition and to ensure safe operation, the installation and safety instructions must be observed and followed. You should not dimension the ballast unit too small.

When used in commercial facilities, the accident prevention regulations of the Association of Industrial Trade Associations for electrical equipment and installations must be observed.
If safe operation is no longer possible, shut down the unit immediately. Safe operation is no longer possible if the unit shows visible damage, the unit no longer works, is wet after prolonged storage under unfavourable conditions and transport damage or damaged plugs/cables are visible.
Do not connect the compatible products until they have reached room temperature. If the unit temperature is lower, moisture may condense in the unit and possibly damage it.
Disconnect all electronic components from the mains before carrying out maintenance work.
Electrical wiring (connection) may only be carried outby authorised specialists!

Guarantee/Warranty

No changes may be made to the product or other accessories.
Do not connect the unit to the mains if any parts of it have become wet.
In the event of damage caused by non-observance of the safety instructions, the warranty will be invalidated! ECONLUX GmbH accepts no liability for any consequential damage resulting from this.
ECONLUX GmbH also accepts no liability for damage to property and/or personal injury caused by improper handling or non-observance of the safety instructions.